ISCSI
- iSCSI Server Configuration
This article provides a comprehensive guide to configuring an iSCSI (Internet Small Computer System Interface) server. iSCSI allows you to access storage devices over a TCP/IP network, presenting them to the operating system as local block devices. This is a cost-effective alternative to Fiber Channel and is suitable for various applications, including virtual machine storage, database storage, and file servers. This guide assumes a basic understanding of networking and server administration. We will cover setup on a Linux server, specifically using `targetcli`, but the concepts apply to other operating systems as well. See also RAID configuration for related storage options.
What is iSCSI?
iSCSI is a transport protocol that allows SCSI commands to be sent over an IP network. Think of it as wrapping SCSI commands inside IP packets. This allows you to connect to storage devices located anywhere on the network. The iSCSI initiator (the client) communicates with the iSCSI target (the server) to access the storage. Understanding TCP/IP networking is crucial for successful iSCSI implementation. Compared to Network File System (NFS) or Server Message Block (SMB), iSCSI operates at the block level, offering potentially better performance for certain workloads.
Prerequisites
Before you begin, ensure you have the following:
- A dedicated server to act as the iSCSI target.
- Storage devices (hard drives or SSDs) you want to share via iSCSI.
- A network connection with sufficient bandwidth. Gigabit Ethernet is highly recommended.
- A Linux distribution (e.g., Ubuntu, CentOS, Debian) with root access.
- The `targetcli` utility installed. This is usually available in your distribution's package manager. Refer to Package Management for details on installing software.
Setting up the iSCSI Target with `targetcli`
`targetcli` is a command-line utility for managing iSCSI targets. It provides a structured way to configure and control your iSCSI storage.
1. **Launch `targetcli`:** Open a terminal and type `targetcli`.
2. **Create a New Target:** Use the following commands:
``` targetcli create target iqn.2024-01.com.example:storage.target1 ```
Replace `iqn.2024-01.com.example:storage.target1` with a unique IQN (iSCSI Qualified Name). IQNs uniquely identify your iSCSI target. A valid IQN starts with 'iqn.' followed by a reverse domain name and a unique identifier.
3. **Create a LUN (Logical Unit Number):** A LUN represents a block device exposed by the target.
``` storage create /backstores/disk1 /dev/sdb storage map target iqn.2024-01.com.example:storage.target1 /backstores/disk1 ```
Replace `/dev/sdb` with the device name of your storage device. *Caution*: This will expose the entire device, so be certain it's what you intend. See Disk Partitioning for information on partitioning disks.
4. **Configure Access Control (Optional but recommended):** Restrict access to authorized initiators (clients) using CHAP (Challenge-Handshake Authentication Protocol).
``` targetcli authentication create chap_auth username=myuser password=mypassword target modify iqn.2024-01.com.example:storage.target1 authentication=chap_auth ```
Replace `myuser` and `mypassword` with strong credentials. Clients will need to be configured with these credentials to gain access. Consider Security Best Practices when choosing passwords.
5. **Save and Exit:**
``` targetcli save exit ```
iSCSI Initiator Configuration
On the client machine, you need to configure the iSCSI initiator to connect to the target. The exact steps vary depending on the operating system. Here’s a general outline for Linux:
1. **Install the iSCSI Initiator:** Use your distribution's package manager to install the `iscsiadm` utility.
2. **Discover the Target:**
``` iscsiadm -m discovery -t st -p <target_ip_address> ```
Replace `<target_ip_address>` with the IP address of your iSCSI server.
3. **Login to the Target:**
``` iscsiadm -m node -T iqn.2024-01.com.example:storage.target1 -p <target_ip_address> -l ```
If you configured CHAP authentication, you'll need to provide the username and password:
``` iscsiadm -m node -T iqn.2024-01.com.example:storage.target1 -p <target_ip_address> -l --chapusername myuser --chappassword mypassword ```
4. **Verify Connection:** The connected iSCSI device will appear as a block device (e.g., `/dev/sdb`, `/dev/sdc`) in your system. You can format and mount it as needed.
Technical Specifications Table
| Parameter | Value |
|---|---|
| Protocol | iSCSI |
| Transport Layer | TCP/IP |
| Block Size | 512 bytes - 64KB (configurable) |
| Authentication | CHAP (optional) |
| Maximum Transfer Unit (MTU) | 1500 bytes (standard Ethernet) or Jumbo Frames (9000 bytes) |
Performance Considerations
| Factor | Impact |
|---|---|
| Network Bandwidth | Directly affects transfer speeds. Gigabit Ethernet is minimum recommended. |
| CPU Utilization | iSCSI processing can consume CPU resources on both target and initiator. |
| Disk I/O Performance | The speed of the underlying storage devices is a critical factor. |
| MTU Size | Jumbo frames can improve performance by reducing overhead, but require network configuration. |
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Cannot discover target | Verify network connectivity, firewall rules, and target configuration. |
| Authentication fails | Double-check CHAP username and password. |
| Slow transfer speeds | Check network bandwidth, disk I/O, and MTU size. Consider using multiple iSCSI sessions. |
| Device not recognized | Ensure the iSCSI initiator is properly installed and configured. Verify the LUN is mapped correctly on the target. |
Further Reading
- Storage Area Network (SAN) - A more general overview of storage networking.
- Linux Filesystems - Information on formatting and mounting block devices.
- Network Configuration - Details on setting up network interfaces and routing.
- Virtualization - iSCSI is frequently used for virtual machine storage.
- Disaster Recovery - iSCSI can be used for replicating data for disaster recovery purposes.
Intel-Based Server Configurations
| Configuration | Specifications | Benchmark |
|---|---|---|
| Core i7-6700K/7700 Server | 64 GB DDR4, NVMe SSD 2 x 512 GB | CPU Benchmark: 8046 |
| Core i7-8700 Server | 64 GB DDR4, NVMe SSD 2x1 TB | CPU Benchmark: 13124 |
| Core i9-9900K Server | 128 GB DDR4, NVMe SSD 2 x 1 TB | CPU Benchmark: 49969 |
| Core i9-13900 Server (64GB) | 64 GB RAM, 2x2 TB NVMe SSD | |
| Core i9-13900 Server (128GB) | 128 GB RAM, 2x2 TB NVMe SSD | |
| Core i5-13500 Server (64GB) | 64 GB RAM, 2x500 GB NVMe SSD | |
| Core i5-13500 Server (128GB) | 128 GB RAM, 2x500 GB NVMe SSD | |
| Core i5-13500 Workstation | 64 GB DDR5 RAM, 2 NVMe SSD, NVIDIA RTX 4000 |
AMD-Based Server Configurations
| Configuration | Specifications | Benchmark |
|---|---|---|
| Ryzen 5 3600 Server | 64 GB RAM, 2x480 GB NVMe | CPU Benchmark: 17849 |
| Ryzen 7 7700 Server | 64 GB DDR5 RAM, 2x1 TB NVMe | CPU Benchmark: 35224 |
| Ryzen 9 5950X Server | 128 GB RAM, 2x4 TB NVMe | CPU Benchmark: 46045 |
| Ryzen 9 7950X Server | 128 GB DDR5 ECC, 2x2 TB NVMe | CPU Benchmark: 63561 |
| EPYC 7502P Server (128GB/1TB) | 128 GB RAM, 1 TB NVMe | CPU Benchmark: 48021 |
| EPYC 7502P Server (128GB/2TB) | 128 GB RAM, 2 TB NVMe | CPU Benchmark: 48021 |
| EPYC 7502P Server (128GB/4TB) | 128 GB RAM, 2x2 TB NVMe | CPU Benchmark: 48021 |
| EPYC 7502P Server (256GB/1TB) | 256 GB RAM, 1 TB NVMe | CPU Benchmark: 48021 |
| EPYC 7502P Server (256GB/4TB) | 256 GB RAM, 2x2 TB NVMe | CPU Benchmark: 48021 |
| EPYC 9454P Server | 256 GB RAM, 2x2 TB NVMe |
Order Your Dedicated Server
Configure and order your ideal server configuration
Need Assistance?
- Telegram: @powervps Servers at a discounted price
⚠️ *Note: All benchmark scores are approximate and may vary based on configuration. Server availability subject to stock.* ⚠️